Wednesday, April 18, 2012

Simple Ideas to Design a Stone Fireplace


Rock fire places were among the first ever designed fire places. They were designed to offer warm and were not very stylish or design. In the last were designed in old castles or estates. There are also traditional stone fire places that signify the majesty of designs Romanesque, Medieval, and Edwardian Ancient. You should think properly before setting up a stone fire place, and then the sensation you want to make in the home.

You need to build codes for your area and here the following steps to do:

1.  Check with the office of your county commissioner of any permits or codes you must follow before you begin your design.

2.  Decide where the chimney will be placed. It must have a chimney.

3.  Check your foundation. Page Design or extra support for the area under your fireplace.

4.  Decide the style of the fireplace that will enhance to look of your room. For example, stone field may improve one aspect of the country. A hand-carved limestone to trigger a contemporary design.

5.  Measure height, width and depth the area where you plan to build. A fireplace will occupy space on the outside and inside. Can be designed almost flush with the existing wall. On a graph paper, plot the width and depth measurements of your fireplace for feet and inches, using a square of graph paper equal one foot. Measure the rest of the wall space of the room and mark on the card. On another sheet of graph paper, measure the 'stack height and the expected height of the hall itself to generate a visual representation of how the fireplace fits into any room.

6. Choose a fireplace insert must fit the space. The insert is part of the fireplace where the fire will burn. The insert can be completely open or have glass doors. The rock surrounding will insert the largest fireplace. 
Choose a smaller insert your finite space allows. Pencil inserts measurements on your graph paper.

7. Design your chimney at least 10 meters high with a chimney that is large enough to handle your fireplace insert. A chimney that is too narrow will not allow the smoke to leave the room fast enough.

8. Choose a chimney design will protect your chimney from animals, rain or wind downdraft.

9. Choose real stone that has been selected in a quarry or field. Faux stone can be purchased at most home improvement centers. Add stone veneer on the walls that surround your fireplace insert for a fireplace lighter and cheaper. Pencil the width of the stone that surround your graph paper.

Useful Link


No comments:

Post a Comment